You are currently browsing the category archive for the ‘Smashwords’ category.

One of the few problems with Smashwords is that once you submit a document, it’s published!  So you have to be ready with corrections right away!

But there are a couple of partial ways to test out your epub before you submit it to Smashwords.

First, use the free/shareware app “Calibre.”  http://calibre-ebook.com

For Smashwords, following instructions in the The Smashwords Style Guide, you format, and mostly DE-format your Microsoft Word file, so it is in a basic form that gets along well with ebook readers.

Once you have done this,  you can take your file into Calibre and see how it will look in an ebook reader. This can be especially important if you are using images in your book, because they can sometimes wind up in unpredictable places.

To test a word.doc file, open Calibre
Click the top left menu item, Add Books
When the book has been added, Go up to the top and click on Convert Books, leaving all the settings as they are.
After the book has been converted, select the title, and click View, and you will be able to see you ebook in action.

If you find any mistakes, go back to your Word file, and correct them there.

Of course, Calibre can do a lot more than this. This powerful little software will allow you to do a number of transformations on epubs, including serving as a convenient ebook reader.

Second, if you want to make a really thorough final check, after your file is completed, go to http://validator.idpf.org/ and select the file from your desktop. That should show you any remaining problems. Or you can just wait and see if Smashwords finds any issues, otherwise, you are clear.

 

 

 

 

 

 

 

Advertisements

It can be nice to have a bit of space between chapters in a book, or major sections in a shorter publication.

If  you use page breaks in MS word to separate chapters, some formats will strip out these pagebreaks.

To work around this,  put an extra paragraph break before and after the page break so some separations will persist.

But make sure, especially for Smashwords, that you do not put more than 3 paragraph breaks in a row, or you will get an error message. This is because too many breaks can produce blank pages in the final ebook, annoying your readers.

One nice feature of publishing via Smashwords is that they provide extensive help.

The place to start is with the useful and frequently updated guide by the actual owner of the company, Mark Coker.

http://www.smashwords.com/books/view/52

If you need help beyond what is offered there, check the Support FAQ link.

http://www.smashwords.com/about/supportfaq

It offers extensive written support, plus contact links. Also check the timely and useful blog by Coker, the Site Updates:

http://www.smashwords.com/about/beta

If all else fails, you can reach a person at Smashwords via the Contact link on the Support page.

These templates now include a reminder of the exact output format for your book manuscript, MS Word 97/2000(.doc) so it will work with Smashwords.

Fiction Template June 2011

Nonfiction Template June 2011

Best wishes in your book publishing!

Here are new templates for Smashwords, spring 2011. We have found that Open Office works as well as MS Word for the final formatting, and if you have a Mac, NeoOffice is the best of all, making the later addition of a Table of Contents very easy.

Manuscripts prepared with these templates also work for Amazon DTP Kindle eBook publishing.

Here is the template for fiction books:
FictionTemplateMar2011

And here is the template for non-fiction:
NonficTemplateMar2011

Instructions are in the text within the templates.

Hope these help. If you find them useful, support our work by doing your Amazon shopping using our store—enter via the link in our blogroll.

F. Mackelroy and Stanley Dumanig show you how to make a linked Table of Contents using NeoOffice (or Open Office) that passes both Smashwords submission and premium distribution hurdles.

Smashwords now requires a linked Table of Contents for most non-fiction books.

On rare occasions, you may have chapter names that will auto-generate a linked Table of Contents when processed by the Smashwords translaters, but generally, you will have to make the links by hand. Setting up Hyperlinks is easier and faster in OpenOffice or NeoOffice than in MS Word, although you will still need to save the final document as MS word 97/2000/XP(.doc) for final submission to Smashwords.

To make your Linked Table of Contents, try one bookmark using the following instructions, test it, and when you have it working, then do them all.

These are the basic steps:
1. Write TOC
2. Set Bookmarks
3. Make hyperlink
4. Test, by holding down command and clicking on the TOC hyperlink
5. Repeat

These are the details:
1. Write the items in your Table of Contents
Type your chapter names at the front of the book in regular text, one chapter title to each line, so it looks like a usual table of contents, with no other formatting.

2. Set your bookmarks
In the body of your book’s text, go to your first chapter, in the area of the chapter title, and click immediately before the first letter of the chapter title. Then select Insert, Bookmark, and give it a name that you will recognize—no odd characters or spaces.

Its bookmark name will not be visible to the reader, so it does not have to make sense except to you.

Never highlight any character when setting Bookmarks. Simply put the cursor right before the character where you want to bookmark. Highlighting a character when making a Bookmark will break the TOC, and all of the links will go to the end of the page.

The bookmark name must be less than 32 characters.

There must be no spaces within the bookmark name.

Do not use special characters—just A through Z and 1 through 9 in any combination.

The bookmark name does not need to be a real word, it can be something like ch3 or artintro1 or ch1begin

Place only one bookmark per line. Do not set up two Bookmarks in a single line, or have one Bookmark in two consecutive lines.

If your chapter heading has more than one line, just insert the bookmark in front of the first word of the first line, OR the first word of any one of the lines—but only one of these.

If you are using Openoffice or NeoOffice, if you forget whether you have added a bookmark, when you click Insert bookmark, the popup list will show your current bookmarks.

If you are not using these two softwares, and your list is unusually complex, you many need to make note of each of these bookmark names in a separate file so you can find them later.

3. Make Hyperlinks back to Table of Contents
Now that you have set all your bookmark names, make the hyperlinks from the Table of Contents to the names/anchors/bookmarks you just inserted:

Go back to the Table of contents at the front of your book,
Select all the text in the appropriate line, and click Insert, Hyperlink. (The warning about spaces does not apply here.)
In the Hyperlink area, click on the Document icon.
Under the Target in Document section, click on the Bullseye icon, and a window will pop up.
In that window, open the Bookmarks list, and choose the appropriate bookmark you placed earlier. (This is where you may need to refer to the bookmark list you made earlier.)
Click Apply and Close in the popup window.
And again, click Apply and Close in the bigger window.
An underline should appear under the Table of contents word or phrase you selected, just like a link on a web page.

Test it first, then
Repeat, to apply links for each line of your Table of Contents.

4. Test
Test the Table of Contents links you have just made, by holding down the Command key and clicking on each TOC hyperlink in the Table of Contents.

Have you been getting the feedback “Too many paragraph breaks?” from Smashwords or Amazon DTP when you submit a manuscript? Here’s why, and what to do.

Quite often these days, we tend to automatically hit a carriage return or extra space between paragraphs. For email, web pages, and other formats, this looks nice, breaking up the text and providing some white space.

But once you convert such nicely formatted text for an eBook reader, it often goes haywire. adding way too much space, sometimes even a whole page-break.

The first fix is to use the templates we have provided here.

For Amazon DTP
Fiction Template for Amazon Digital Text Platform
NonFiction Template for Amazon Digital Text Platform

And for Smashwords
Fiction Template
NonFiction Template

The second fix is the same as that detailed within the templates, but we will spell it out here, how to format your document so the only space after a paragraph is within the formatting section, not as a carriage return.

To set the spacing between paragraphs in a way that will not confuse eBooks in Open Office, open your document, then under Format, Paragraph, set the Below paragraph spacing to 0.8 to 0.14 inch. Follow the same general procedure for documents in Word.

This will give you a bit of space between paragraphs without jamming up the machinery.

For fiction, don’t use any space at all between paragraphs, just follow the indenting suggestion in the template.

Because formatting for ePublishing can be very finicky, here are a couple of templates for use in Microsoft Word or Open Office, a free cross-platform word processing software, to help you get started in formatting your document for Smashwords publishing.

Open the appropriate template, paste your text after the included text, and follow the formatting instructions in the template and in the Smashwords Style Guide. Make sure you read the latest version of the Style Guide for final requirements.